K8·凯发(中国)天生赢家·一触即发

How to install steel clean door

　　The steel clean door can be divided into two categories: the machine-made plate clamp type steel cleaning door and the manual plate flush type steel cleaning door. The installation methods of the two types are different. Let's talk about them respectively:

　　1. Machine made plate clamp type steel clean door:

　　First, install galvanized groove at the edge of the machine-made plate of the door opening, and then install the door frame in the form of clip, fix it with fasteners, seal the fastener with a cap, and seal the door frame with special silica gel, so as to maintain the integrity and beauty, and pay attention to the horizontal and vertical installation!

　　First connect with the central aluminum connector, and then fix it with fasteners (self tapping screws, etc.), seal the fasteners with a cap, seal the door frame with special silica gel to keep the integrity and beauty, and pay attention to maintain the installation level and perpendicularity; then directly use the central aluminum connection, and seal the door frame with special silica gel to maintain the integrity and aesthetics, and pay attention to the horizontal and vertical installation Straightness; then install fastening around the door opening with groove aluminum parts (or folding parts) to adjust the size of the door opening. Then the door frame is embedded in the way, and then fixed on the slot part. The four sides are sealed with special silica gel to maintain the integrity and aesthetics, and pay attention to the horizontal and vertical installation.